Specifications

3kV maximum; minimum 0 volts;
maximum DC current 60mA

Output Pulse Voltage

3kV maximum; minimum 0 volts;
maximum current 20A peak.

Output Pulse Characteristics

Gate

Gate source is external and requires a pulse of +5           volts into a 50 ohm load.

The rise time must be <20 nseconds and the minimum pulse width 10µ sec maximum is DC.

The gate input connector is a BNC on the rear panel

Current Transformer Output

A current monitor (torroidal coil) is provided--
standard  calibration is 10A = 12.5V (other sensitivities
are available).

The output is through a BNC located on the rear panel

Voltage Monitor Output

A voltage monitor is provided with standard calibration
being 1000:1.

The output is available through a BNC located on the rear panel

Input Power

110/220 VAC, 50/60 Hz switchable

Operating Environment

40° C typical ambient temperature, 60° C max.

General

19 inches wide by 5.25 inches high by 13 inches                  deep.

Weight is 15lbs.

Note: All ATC neutron generator products are listed under the heading of equipment subject to the Nuclear Non-Proliferation rules and regulations and United States Department of Commerce regulations pertaining to end use(r) and final destination of product. ATC requires all customers to sign and submit a statement on form acknowledging these requirements at the time of order.